3 SIMPLE STEPS TO GET BEST QUOTE FOR DRYWALL PARTITION
1. Submit Request to Quote
2. Receive up to 3 Quotation Proposals
3. Select BEST QUOTE to engage partition works company
DRYWALL PARTITION
Ever wished you had an extra room in your home or wanted to section off part of an open space in your office? Putting up a drywall partition is a good solution that can add value and functionality.
What is Drywall Partition?
A drywall partition is a non-structural wall made of gypsum boards attached to light-gage metal studs. Unlike brick or concrete walls, drywall partitions are not load-bearing – they simply divide interior spaces.
Drywall partitions are popular because they’re affordable, easy to install, and provide good sound insulation. To construct one, the following are needed:
- Metal studs: Lightweight studs made of galvanized steel that form the partition frame.
- Tracks: U-shaped channels that attach the studs to the floor and ceiling.
- Gypsum boards: Pre-fabricated drywall panels, typically 4x8 feet, that are mounted to the studs.
- Joint compound: A plaster-like material used to seal gaps between boards and cover seams.
- Tape: Paper or fiberglass mesh tape embedded in the joint compound over seams for strength.
- Screws or nails: To fasten the boards to the studs.
- Mud tray, trowel, sanding sponge, primer/paint: To finish the wall.
Installing a drywall partition involves securing the tracks, attaching the studs, cutting boards to size, fastening the boards to the studs, and finishing the seams. For the installation, it’s best to hire a professional drywall contractor.
In summary, drywall partitions are versatile, affordable wall systems used to divide interior spaces. When installed properly and finished well, they can create attractive, durable room dividers in any home or office.
What Material is used for Drywall Partition?
Drywall partitions are made of gypsum plasterboard, commonly known as drywall. Gypsum is a soft mineral that is heated to remove the water, then sandwiched between thick paper. The end result is an inexpensive, durable board used in construction.
For extra stability, you can install the drywall horizontally and vertically. The horizontal layers help prevent sound transmission from one room to another. Additional insulation like fiberglass placed in the wall cavity will also improve the soundproofing.
Benefits of Using Drywall Partition
Drywall partition offers several advantages over other wall types.
- Cost effective. Drywall is an affordable material, keeping costs low for materials and installation. It’s a budget-friendly option for dividing spaces.
- Quick installation. Drywall panels are lightweight and easy to cut, allowing for fast installation. Walls can be constructed in a matter of days.
- Flexibility. Drywall can be installed on wood or metal studs, and it adapts well to any wall shape. Curved walls, angles, and corners are easily achieved.
- Soundproofing. Adding insulation between the drywall panels helps block noise transfer between rooms. For improved soundproofing, consider using special sound-deadening drywall.
- Easy to repair and modify. Drywall is simple to patch, repair, and alter. Panels can be cut out and replaced if needed. You can also easily add or move electrical outlets and vents.
- Paintable surface. Drywall provides a smooth surface that readily accepts paint and wallcoverings. It can be textured or left smooth, depending on your needs.
- Fire resistant. Regular drywall, and especially fire-rated drywall, provides fire resistance and containment. It helps slow the spread of flames in the event of a fire.
- Moisture resistant. For damp areas like bathrooms, moisture-resistant drywall or cement board should be used to prevent water damage.
In summary, drywall partition is an excellent, flexible, and affordable wall option for residential and commercial spaces. Its many benefits make it a smart choice for dividing and improving interiors.
Types of Drywall Partition Systems
There are several types of drywall partition systems to choose from for the drywall partition. The most common are:
- Steel studs: Consists of vertical steel channels (studs) secured to floor and ceiling tracks. Drywall panels are then attached to the studs. Steel studs are non-combustible, termite-proof, and mold-resistant. However, they can be more expensive and difficult to work with compared to wood.
- Wood studs: Vertical wood boards (studs) attached to top and bottom plates. Wood studs are easy to work with but can warp and be eaten by pests if not properly sealed and maintained. Wood studs should not be used in high-moisture areas.
- Shaft wall: Prefabricated metal panels installed between vertical metal channels. A gypsum liner is applied over the panels. Shaft walls provide a quick, economical solution for stairwells, elevator shafts, and mechanical chases. However, they may not provide the same soundproofing or fire resistance as steel or wood stud systems.
- Ceiling suspension grid: A suspended metal grid framework attached to the structural ceiling. Drywall panels or ceiling tiles are then installed into the open areas of the grid. Suspension grids are used to create dropped ceilings and soffits. They provide easy access to plumbing, wiring, and ductwork above the ceiling plane.
The type of drywall partition system you choose will depend on your needs for fire resistance, durability, budget, and the function of the space. A professional contractor can help determine the best solution for your residential or commercial project.
Drywall and its uses
Home Partitions
Creating partitions in your home allows you to maximize your space by dividing rooms into separate areas. Drywall is an affordable and versatile material for creating partitions. Whether you want to section off a bedroom to make a walk-in closet or divide a large room into a bedroom and home office, drywall partitions can get the job done.
Office Partitions
Office partitions are essential for creating separate workspaces in an open floor plan. They allow you to divide a large space into smaller, more private areas for employees or teams. When choosing drywall partitions for your office, consider:
- Height – Standard partition height is around 5 to 6 feet, allowing for some privacy while still keeping an open feel. Taller 8-foot partitions are better for maximum soundproofing between spaces.
- Doors – For easier access between partitioned spaces, include doors. Hollow core doors are lightweight, inexpensive, and easy to install. For more sound control, solid core doors are a great choice.
- Windows – Add windows to partitions to allow natural light to filter through the space. This prevents partitioned areas from feeling closed in or cramped. Standard sizes are around 2 by 3 feet.
- Installation – Drywall partitions are designed for easy installation and removal. They attach directly to the floor, ceiling, and existing walls. This allows maximum flexibility if you need to reconfigure your office layout in the future.
- Electrical – Include electrical outlets, switches, and wiring in your partition design. This allows employees on both sides of the partition access to power and lighting controls.
- Soundproofing – For enhanced sound control between partitioned spaces, consider soundproofing materials like mass-loaded vinyl, soundproof drywall, insulation, and acoustic sealants.
Drywall partitions create flexible workspaces that can be reconfigured as needed. They represent an affordable solution for dividing open concept areas into private offices or meeting rooms in a simple, modular way. With some strategic choices in design, they can also provide a good level of soundproofing and privacy between spaces when needed.
Drywall Partition Contractor Singapore
When it comes to drywall partition installation in Singapore, hiring a reputable contractor is key. They have the proper training, experience, and equipment to get the job done right.
What to Look for in a Contractor
Look for a contractor that specializes in drywall installation and partition walls. They should be licensed, insured, and have good reviews from past clients. Ask if they provide a warranty or guarantee for their work. An established contractor will have a portfolio of their past projects to show the quality of their work.
Meet with a few contractors to discuss your needs and get estimates. Make sure they do a site visit to get accurate measurements and understand any challenges. The estimate should include the cost of materials, labor, and any permits needed. Compare the details of each estimate to determine the best overall value.
Don’t just go with the lowest bid. An experienced contractor may charge slightly more, but will save you headaches in the long run. Look for someone with competitive, fair pricing that you feel confident in and can work with well.
The Installation Process
Once you hire a contractor, they will purchase all necessary materials and schedule your installation. They will put up the metal or wooden wall studs, then attach the drywall panels. After taping and mudding the seams and screw holes, they will sand everything smooth.
The final step is priming and painting the new partition wall to match your existing walls. With a professional installation, your new drywall partition will look seamless in no time.
We partner professional wall partition companies to provide drywall partition with best quotes. Contact us to get your Best Quote for drywall partition.